Plusrite 22KW 3-Phase Electric Vehicle Charger

Plug Type

Just as wall sockets and plugs for electrical appliances differ across the world, so too does the plug type for EV chargers.

The standard in the US and Japan is the Type 1–or J1772–while Europe and the rest of the world, including Australia, have the Type 2–or Mennekes–as the standard. Naturally, you would want to ensure the EV charger you install is the Type 2.

Maximum Power Levels

Unless they have a dedicated EV charger installed, most drivers will charge their vehicle at home using an existing, single phase power point. This method is slow, typically adding between 10 and 20km of range per hour plugged in. Dedicated AC EV chargers are either 1-Phase or 3-Phase, with maximum power levels of 7.4KW or 22KW and offering a faster charge than a normal household power point. Depending on the vehicle, these can add 40 to 100km of range per hour of charging. 3-Phase chargers are usually used in industrial settings.

Dynamic Load Balancing

Whether it is installed in a home or at a business, it is highly unlikely that the EV charger will be used in isolation. Normal household or business activities will continue, and this means a constantly varying load on current. EV chargers that include Dynamic Load Balancing (DLB) are highly recommended to ensure the power supply is not overloaded. The DLB will automatically adjust the charging current according to the premises’ idle load quota.

Ingress Protection Rating

Public and commercial charging stations will often be exposed to the elements, including dust and rain. To minimise the impact of these on the lifespan of the EV charger, always look for an Ingress Protection (IP) rating of at least 65. IP65 shows that the charger is dust-tight and water-resistant from all angles. Separate to the IP rating, check too for built-in lightning protection.

Installation

AS/NZS 3000:2018 includes specific requirements covering the installation of EV chargers in both commercial and residential settings. As with any new electrical installation, you should always use certified electricians to install your EV charger. While suppliers of EV chargers don’t offer installation services, reputable suppliers will be able to recommend certified electricians who are also experienced with installing EV chargers as per the required standards.

Now is the right time to consider installing EV chargers at your business, whether operational needs, employee use, or as an added convenience for your customers.

Specifications

• Categorisation - Smart Version
• Maximum Power - 22KW
• Input Voltage - AC240 3-Phase
• Output Voltage 230-400V 6-32A
• Cards - 2 On/Off Cards Provided
• Input Frequency -  50/60Hz
• Display - LED Lights
• Protection Degree - IP65
• Environment Temperature -  -25°C~ +55°C
• Maximum Altitude -  < 2000m
• Charging Cable Length - 6 Metres
• RFID
• DLB
• Wi-Fi
• APP
• Bluetooth
• Over/Under Voltage Protection
• Emergency Stop
• Over Current Protection
• CP Signal Short Circuit Protection
• Over Temperature Protection
• Lightning Protection

Click here for Data Sheet